RGBLink New Driver 2 Quick Start User Manual
Page 16
Address：S602-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
15
(8) Turn the knob, and choose [CHOOSE NETWORK], push the knob to confirm. Turn the
knob, choose Port U and push the knob to confirm:
(9) Push MENU to return the previous menu, choose [RECEIVING CARD SET], push the
knob to confirm, and enter to the next level menu, shown as follows:
(10) Turn the knob, and choose [X], set X as 360 (Note: X=VERTICAL CARD×WIDTH,
before we set vertical card as 3 and width as 120). Shown as follows:
>SENDING CARD NO.2
CHOOSE NETWORK PORT D
SENDING CARD SET >>
RECEIVING CARD SET >>
SENDING CARD NO.2
>CHOOSE NETWORK PORT U
SENDING CARD SET >>
RECEIVING CARD SET >>
SENDING CARD NO.2
CHOOSE NETWORK PORT U
SENDING CARD SET >>
>RECEIVING CARD SET >>
>
X 0
Y 0
VIDEO RESOLUTION 0
SAVE TO SENDER CARD
>
X 360
Y 0
VIDEO RESOLUTION 0
SAVE TO SENDER CARD