beautypg.com

RGBLink New Driver 2 Quick Start User Manual

Page 25

background image

Address:S602-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C

Tel: 00865925771197 Fax:00865925771202

Email: [email protected] http://www.rgblink.cn

24

8. Connect (NEW DRIVER 2)-MCU board to (NEW DRIVER 2)-CON board with 2*8IDC line. Please

refer to the following figure for more detailed connections:

9. Dispensing on each screw, and heat glue on each connection joints.

10. Finishing and binding the cables

.

11. After it has been confirmed correct, cover the front panel, and fixed by 6 pieces of 3*5 black flat

head screws, as shown in the figure below: