RGBLink New Driver 2 Quick Start - Manual (Page 10)

Address：S602-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen,Fujian Province, P.R.C
Tel: 00865925771197 Fax:00865925771202
Email: [email protected] http://www.rgblink.cn
9
(6) Choose [SENDING CARD], push the knob to confirm, turn the knob, choose No.1,
push the knob to confirm.
(7) Turn the knob, and choose [CHOOSE NETWORK], push the knob to confirm. Turn the
knob, choose Port U and push the knob to confirm.
(8) Turn the knob, choose [RECEIVING CARD SET], push the knob to confirm, and enter
to the next level menu, shown as follows:
SENDING CARD TYPE LINSN
BRIGHTNESS SET >>
>QUICK POINT SCREEN >>
Gamma SET >>
>SENDING CARD NO.2
CHOOSE NETWORK PORT D
SENDING CARD SET >>
RECEIVING CARD SET >>
>SENDING CARD NO.1
CHOOSE NETWORK PORT D
SENDING CARD SET >>
RECEIVING CARD SET >>
SENDING CARD NO.1
>CHOOSE NETWORK PORT U
SENDING CARD SET >>
RECEIVING CARD SET >>