RGBLink New Driver User Manual - Manual (Page 45)

New Driver User Manual 45
C Sending Card Installation
RGBlink provides two kinds of New Driver, one is the device equipped with sending card,
the other one is the device without sending card. Here we will introduce the installation
steps of sending card, take LINSN for example.
In the device without sending card, we provide lines as follows, 11 pcs in all:
Double line: 3P, 30 cm, 2.54 pitch 1 pc
Double line: 4P, 3 cm, 2.54 pitch 2 pcs
Straight line: φ4.0 round head terminal, +5mm immersion, 1015-18 #/, yellow and green
double color, 170 mm long 1 pcs
Audio line: 3.5mm audio line, male to male, 30 cm long 1 pcs
Double line: TJC8-2P double line, 600 mm long, red and black 2 pcs
IDC line: 2*5, 2.54 pitch, 400 mm long, color 1 pc
USB cable: USB A port to USB B port 1 pcs
Double line: 30 cm long 2 pcs
Sending Card Panel Installation
Please process the sending card panel before install the sending card. Operations are as