5: cable output of sending card, Audio input, Dvi input – RGBLink New Driver User Manual User Manual
Page 24: Hdmi input, 9,10: power interface and switch, Hardware orientation
2. Hardware Orientation
New Driver Back Panel
New Driver User Manual 24
RS 232 INPUT connect serial communication interface of RS232 control
protocol. RS232 OUTPUT is serial communication interface of multiple
devices cascading control, can connect devices through DB9 serial cable.
It can cascade 4 sets of devices currently.
4. 5: Cable Output of Sending Card
Connect to LED screen through cable.
6: Audio Input
Audio input. Connect to microphone or the device with audio interface.
7: DVI Input
DVI input. Input the video signal from computer, DVI signal generator.
Connect to the same DVI interface.
(This Connection does not support hot-plugging).
8: HDMI Input
HDMI input. Input the image signal from computer.
9,10: Power Interface and Switch
AC 85-264V 2A 50/60Hz IEC-3 power interface.