Quick connection, Edid, Cascade – RGBLink New Driver User Manual User Manual
Page 30: Language, Languane
New Driver User Manual 30
Select [BRIGHTNESS SET], push the knob to confirm, show level 2 menus
as follows:
SENDING CARD SET: User can set X, Y and save to sending card.
RECEIVING CARD SET: Including the following settings:
CHOOSE CABLE: User can choose PORT D or PORT U.
HORIZONTAL CARD.
VERTICAL CARD.
WIDTH.
HEIGHT.
D PORT Offect (A/B) X.
D PORT Offect (A/B) Y.
CONNECT CARD TYPE: There are 8 kinds of connection mode currently.
Send to receiver after setting.
SEND TO RECEIVER: Send to receiver after setting.
Select [EDID], push the knob to confirm, show level 2 menus as follows:
READ EDID: Choose the output port and read the EDID of sending card.
INPUT PORT: User can choose DVI or HDMI signal.
WRITE EDID: Choose the output port and write EDID.
EDID RESET: Choose the output port and reset EDID.
User can choose ON or OFF to enable or disable the cascade function.
Through this option, user can choose Chinese or English according to their