System setup and operations – RGBLink New Driver User Manual User Manual
Page 39
5. System Setup and Operations
How to Realize LED Screen Connection
New Driver User Manual 39
After setting, push MENU to return the previous menu, choose [CONNECT CARD TYPE]
according to actual connection mode. New Driver support 8 kinds of connection modes,
they are
,
,
,
,
,
,
and
respectively.
Send to receiver after choose the connection mode, observe the display screen and make
sure if display image is correct. If wrong, change the connection modes. Then connect the
Port D or Port U of One Sending Card to LED Screen is finished.
(8) The setting for port D is same as the above setting.
Rendering is as follows:
2. Connect the Port D and Port U of One Sending Card to LED Screen
(1) First, make sure the device is in normal operation. The red power indicator lights when
HEIGHT 120
D PORT Offect (A/B) X 0
D PORT Offect (A/B) Y 0
>
CONNECT CARD TYPE >>