Research Concepts RC2500 User Manual
Page 10

RC2500 Antenna Controller
Chapter 2
Basic Function Description
3
Research Concepts, Inc. • 5420 Martindale Road • Shawnee, Kansas • 66218-9680 • USA
www.researchconcepts.com
Figure 2.2 - RC2500 Keypad
MODE
This key allows the user to change the controller’s current mode. Modes are used to access the
various functions of the controller. For example, when MANUAL mode is active the user can
manually jog the antenna; When SETUP is active the user can program satellite position data
into the controller’s non-volatile memory. The modes are divided into two groups: Operational
Modes (which include MANUAL, AUTO, REMOTE, and TRACK modes) and Programming
Modes (which include SETUP, DELETE, RESET, and CONFIG modes). To change from one
GROUP to the other DEPRESS THE MODE KEY FOR AT LEAST FIVE SECONDS AND THEN
RELEASE IT. To toggle between the modes in a given group rapidly depress and release the
mode key.
SCROLL UP, SCROLL DOWN
These keys are used to scroll up or down through a list of items.
YES, NO
These keys are used to supply an answer to a yes or no type question.
ENTER
This key is used to select an entry from a list, terminate a prompt for some action by the user, or
to complete the entry of numeric data.
0-9, DECIMAL POINT (with the stop key), BKSP
These keys are used for numeric entry. The BKSP key causes the cursor to move one column to
the left writing over the character that was there.
SPEED
This key toggles the az/el speed from fast to slow and vice versa.
AZ CW, AZ CCW, UP, DOWN
These keys are used to manually jog the antenna in certain modes. CW refers to clockwise and
CCW refers to counter clockwise. The sense of azimuth rotation is as seen by an observer
located above the antenna. On early versions of the controller the AZ CW, AZ CCW, UP, and
DOWN labels were not present on these keys. On these controllers (when certain modes are
active) the left arrow key initiates ccw azimuth movement, the right arrow key initiates cw azimuth
movement, the up arrow key initiates up elevation movement, and the down arrow key initiates
down elevation movement.
Mode
CCW
N
CW
Scroll
Scroll
Dn/No
Up/Yes
Enter
E
W
V
H
Stop
S
Speed
+/-
BKSP
1
2
3
4
5
6
7
8
9
0
.
Up
Down
Pol
Pol
AZ
CCW
AZ
CW