D-Link DIR-412 - Manual (Page 78)

74 D-Link DIR-412 User Manual
Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the
added overhead.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Setup
and then click Wireless Settings on the left side and then click the
Manual Wireless Network Setup button.
2. Select Enable WPA/WPA2 Wireless Security (Enhanced) from the
Security Mode drop-down menu.
3. Select Auto(TKIP/AES), TKIP, or AES from the Cipher Type drop-down
menu. If you have wireless clients that use both types, use TKIP/AES.
4. Select EAP from the PSK / EAP drop-down menu.
5. Enter the IP Address of your RADIUS server in the RADIUS Server IP Address field.
6. Enter the port you are using with your RADIUS server in the Port field.
7. Enter the security key in the Shared Secret field.
8. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity
until you enable WPA-Enterprise (RADIUS) on your adapter and enter the same passphrase as you did on the router.