Advanced network settings, Upnp, Internet ping block – D-Link DIR-412 User Manual
Page 57: Internet port speed, Multicast streams
53
D-Link DIR-412 User Manual
Section 3 - Configuration
UPnP
Internet Ping Block
Internet Port Speed
Multicast Streams
To use the Universal Plug and Play (UPnP
™
) feature check
the Enable UPNP box. UPNP provides compatibility with
networking equipment, software and peripherals.
Unchecking the box will not allow the DIR-412 to respond
to pings. Blocking the Ping may provide some extra
security from hackers. Check the box to allow the Internet
port to be “pinged”.
You may set the port speed of the Internet port to 10Mbps,
100Mbps, or auto. Some older cable or DSL modems may
require you to set the port speed to 10Mbps.
Check the Enable Multicast Streams box to allow
multicast traffic to pass through the router from the
Internet.
Check the Wireless Enhance Mode box to enable the
router to forward all multicast streams from the Internet
to the wireless station using a unicast stream. This feature
helps improve the quality of multimedia applications for
wireless users.
UPnP:
WAN Ping:
WAN Port Speed:
Multicast
Streams:
Wireless Enhance
Mode:
Advanced Network Settings