beautypg.com

Time settings – D-Link DIR-412 User Manual

Page 59

background image

55

D-Link DIR-412 User Manual

Section 3 - Configuration

Time Settings

Select the Time Zone from the drop-down menu.

Check the box to enable Daylight Saving time.

Click this button to set the device’s time the same to local

PC.

Check the box to enable the device to automatically

synchronize with a D-Link NTP Server. NTP stands for

Network Time Protocol. NTP synchronizes computer clock

times in a network of computers. This will only connect to

a server on the Internet, not a local server.

Select one of the D-Link NTP Servers from the drop-down

menu. The DIR-412 will then synchronize it’s clock to be

the same time as the D-Link Internet time server. Click

the Update Now button to synchronize with the D-Link

Internet time server immediatley.

To manually input the time, use the drop-down menus to

enter the values in these fields for the Year, Month, Day,

Hour, Minute, and Second.

Time Zone:

Enable Daylight

Saving:

Sync your

Computer’s Time

Settings:

Automatic

Time and Date

Configuration:

NTP Server Used:

Set the Time and

Date Manually:

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock.

From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to

automatically adjust the time when needed.

Click the Save Settings button to save any changes made.