D-Link DIR-412 - Manual (Page 61)

57 D-Link DIR-412 User Manual
Section 3 - Configuration
Use this option to save the current router configuration
settings to a file on the hard disk of the computer you are
using. First, click the Save button. You will then see a file
dialog, where you can select a location and file name for
the settings.
Use this option to load previously saved router
configuration settings. First, use the Browse control to find
a previously save file of configuration settings. Then, click
the Load button to transfer those settings to the router.
Click the Restore button to restore all configuration
settings back to the settings that were in effect at the time
the router was shipped from the factory. Any settings that
have not been saved will be lost, including any rules that
you have created. If you want to save the current router
configuration settings, use the Save button above.
Click to reboot the router.
Click the Clear button to restore the device back to the
English interface version and remove other languages
installed for the system web pages.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Clear Language
Pack:
System Settings