D-Link DIR-412 - Manual (Page 34)

30 D-Link DIR-412 User Manual
Section 3 - Configuration
Select Static IP if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses. In
most cases, select Dynamic IP.
Enter the L2TP IP address supplied by your ISP (Static
IP only).
Enter the Subnet Mask supplied by your ISP (Static
L2TP only).
Enter the Gateway IP address provided by your ISP
(Static L2TP only).
Enter the Server IP address provided by your ISP
(optional).
Enter your L2TP user name.
Enter your L2TP password and then retype the
password in the next box.
Select either Always-on, On-Demand, or Manual.
Address Mode:
L2TP IP Address:
L2TP Subnet
Mask:
L2TP Gateway
IP Address:
L2TP Server IP
Address:
User Name:
Password:
Reconnect
Mode:
Choose L2TP (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses an L2TP connection.
Your ISP will provide you with a username and password. This option is typically used for DSL services.
Manual Configuration (WAN Mode)
L2TP (Username/Password)