D-Link DIR-412 - Manual (Page 43)

39 D-Link DIR-412 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Enter the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Apply, you will
need to enter the new IP address in your browser to get
back into the configuration utility.
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Enter the Device name (set to “DIR-412” by default).
Enter the Domain name (Optional).
Uncheck the box to transfer the DNS server information
from your ISP to your computers. If checked, your computers
will use the router for a DNS server.
Router IP Address:
Default Subnet Mask:
Device Name:
Local Domain Name:
Enable DNS Relay: