D-Link DIR-412 - Manual (Page 32)

28 D-Link DIR-412 User Manual
Section 3 - Configuration
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
Enter the IP address (Static PPTP only).
Enter the Subnet Mask (Static PPTP only).
Enter the Gateway IP address provided by your
ISP (Static PPTP only).
Enter the Server IP provided by your ISP
(optional).
Enter your PPTP username.
Enter your PPTP password and
password in the next box.
Select either Always-on, On-Demand, or
Manual.
Enter a maximum idle time during which the
Internet connection is maintained during
inactivity. To disable this feature, enable Auto
reconnect.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address:
PPTP Server IP Address:
Username:
Password:
Reconnect Mode:
Maximum Idle Time:
Choose PPTP (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a PPTP connection.
Your ISP will provide you with a username and password. This option is typically used for DSL services.
Manual Configuration (WAN Mode)
PPTP (Username/Password)