D-Link DIR-412 - Manual (Page 30)

26 D-Link DIR-412 User Manual
Section 3 - Configuration
Select Static if your ISP assigned you the IP address,
subnet mask, gateway, and DNS server addresses.
In most cases, select Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the
password in the next box.
Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Enter a maximum idle time during which the
Internet connection is maintained during inactivity.
To disable this feature, enable Auto-reconnect.
Click the Receive DNS from ISP radio button if
you want to dynamically receive the DNS Server IP
addresses from your ISP. To manually enter the DNS
Server IP addresses, click the Enter DNS Manually
radio button and enter the DNS Server IP addresses
in the Primary DNS Server and Secondary DNS
Server fields.
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect Mode:
Maximum Idle
Time:
DNS Mode:
Choose PPPoE (Username/Password) from the My Internet Connection is drop-down menu if your ISP uses a PPPoE
connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure
to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
Manual Configuration (WAN Mode)
PPPoE (Username/Password)