REMKO RBW 300 PV - Manual (Page 31)

Parameter configuration
Main menu
Main display: In order to access the parameter level, proceed as follows:
10 sec.
oder
or
A B
oder
or
oder
or
oder
or
Fig. 34: Configuration of the parameters - expert level
A: The steps for changing other parameter values
are the same as with the parameter "do2".
B: Confirm the "Mode" key (B) in order to save your
setting and press the "On/Off" key to return to
the main menu.
NOTES
1. If, after changing the values, the "On/Off" key is pressed whilst the parameter flashes, the
values will not be saved and it will jump to the top parameter.
2. After saving the settings via the "Mode" key it is possible to return to the main menu by
pressing the "On/Off" key.
3. After 20 seconds the set values will be saved and the display will show the main screen.
31