REMKO RBW 300 PV - Manual (Page 26)

Recirculation operation
In recirculated air operation the device RBW 300
PV has two fan speeds and the unit RBW 300 PV-
S are only one (the middle) fan speed available.
The recirculation operation can be used in order to
ventilate the connected room, without the heat
pump (compressor) being in operation. To do so,
press the "Electric heating element" key (D) for
approx. 2 seconds. The fan symbol appears in the
display. It is possible to select 2 fan stages (only
by the device RBW 300 PV). In order to implement
a setting press the "Electric heating element" key
(D) for 2 sec.
2 sec.
2 sec.
2 sec.
Fig. 27: Recirculation operation
REMKO RBW
26