REMKO RBW 300 PV - Manual (Page 22)

Symbol functions
1 - Heating mode compressor and heating coil
2 - Economic heating mode, only compressor
1 + 2 - Automatic mode
3 - Holiday mode
4 - Invalid
5 - Recirculation operation
6 - Electric heating element
7 - Parameter selection
8 - Current temperature measured
9 - Timer "On"
10 - Timer "Off"
11 - Minute
12 - Second
13 - ° Celsius
14 - ° Fahrenheit
15 - Keyboard locked
16 - The unit is in standby once the temperature
has been reached
17 - Parameter code for setting the interface
18 - Water temperature storage tank, top
19 - Water temperature storage tank, bottom
20 - Time and date
21 - 1) Actual temperature
2) Parameter values when setting interface
Operation
Commissioning preparation
1. After switching on the power supply the con-
troller uploads the parameters for approx. 15
seconds.
2. Ensure that the storage tank is filled with
water.
3. In order to switch on the unit, touch the "On/
Off" switch for at least 0.5 seconds. The out-
side temperature measured then appears on
the display.
Unit operation
5 sec.
Fig. 17: "On/Off" key
REMKO RBW
22