OWON TDS Series - Manual (Page 63)

5.Advanced User Guidebook
58
Function Items Setting
Acquisition Mode Current
Vertical Coupling DC
Vertical Scale Adjust to the proper division.
Bandwidth Full
Horizontal Level Middle
Horizontal Sale Adjust to the proper division
Trigger Type Adjust to the proper type
Trigger Source Show the minimum number of channels.
Trigger Coupling DC
Trigger Slope Current
Trigger Level Mid-point Setting
Trigger Mode Auto
Display Format YT
Run/Stop:
Enable or disable sampling on input signals.
Notice: When there is no sampling at STOP state, the vertical division and
the horizontal time base of the waveform still can be adjusted within a
certain range, in other words, the signal can be expanded in the horizontal or
vertical direction.
Single:
Press this button you can set the trigger mode as single directly, so when
trigger occurs, acquire one waveform then stop.
Copy:
You can save the image, waveform data or setup file by just pressing the
Copy button.
After you have defined the save parameters with the Save
menu, you can save files with a single push of the Copy button. For more
details, please see "To save with Copy button push" on P44.