OWON TDS Series - Manual (Page 55)

5.Advanced User Guidebook
50
11. Select PK-PK in the left menu.
12. Select Add in the right menu, the PK-PK added completes, finish setting of CH2.
The measured value will be displayed at the bottom left of the screen automatically
(see Figure 5-7).
Figure 5-7 automatic measurement
The automatic measurement of voltage parameters
The TDS series oscilloscopes provide automatic voltage measurements including
PK-PK, Max, Min, Mean, Vamp, RMS, Vtop, Vbase, Overshoot and Preshoot.
Figure 5-8 below shows a pulse with some of the voltage measurement points.
Max
Min
PK-PK
Vtop
Vbase
Vamp
Overshoot
Preshoot
Figure 5-8
PK-PK: Peak-to-Peak Voltage.
Max: The maximum amplitude. The most positive peak voltage measured over
the entire waveform.
Min: The minimum amplitude. The most negative peak voltage measured over the