OWON TDS Series - Manual (Page 49)

5.Advanced User Guidebook
44
When entering the interface of editing name, there will be a keypad dialog that let you
touch to enter names. The length of file name is up to 256 characters. When you are
done entering the file name, touch the dialog's Enter to confirm and close the keypad
dialog.
Delete the selected
character
Confirm and exit
Close the keyboard
Move the cursor left/right
Drag to select
Switch between
capital and small
To save with Copy button push
You can save the image, waveform data or setup file by just pressing the Copy button.
After you have defined the save parameters with the Save menu, you can save files
with a single push of the Copy button. For example, if you have d
efined the save
operation to save image to external storage, then each push of the Copy button will
save current screen image
to the defined external storage.
To define the Copy button behavior, follow the steps below.
1. Press the Save button.
2. Select Save to Config in the bottom menu.
3. Select the save type from Screen Image, Waveform and Setup.
4. Select Change folder to define the save path, see "To select the path or file in file
explorer" on P43.
When you push the Copy button, the oscilloscope will perform the action that you
just specified rather than requiring you to enter the Save menu each time.
To manage file
You can create folder, rename or delete a file in File utilities menu.
1. Press the Save button.
2. Select File utilities in the bottom menu.
3. Select path or file in file explorer, see "To select the path or file in file explorer" on
P43.
4. Select Create folder, Rename or Delete in the right menu. See "To edit file
names" on P43.