OWON TDS Series - Manual (Page 43)

5.Advanced User Guidebook
38
Figure 5-4 The displayed waveform after the noise is removed under the
Average Mode, in which the average number of 16 is set.
How to Set the Display System
Press the Acquire button; select Wave Display, XY Mode or Cymometer to set the
display system.
The description of the Display Set Menu is shown as follows:
Display Type
Function Menu Setting Description
Wave
Display
Type
Dots
Vect Only the sampling points are displayed.
The space between the adjacent sampling points
in the display is filled with the vector form.
Persist
Time
OFF
100ms
200ms
…
9.9s
10s
Infinity
Turn the G knob to set the persistence time
Persistence
OFF
Turn off persistence and clear the display.
Clear
Erase the results of previous acquisitions from
the display. The oscilloscope will start to
accumulate acquisitions again.
XY Mode
ON
OFF
Turn on the XY display function.
Turn off the XY display function.
Cymometer
ON
OFF
Turn on the cymometer.
Turn off the cymometer.