OpenEye CM-511 Installation Manua - Manual (Page 23)

29243AC 23
Cable Wiring and Connection
Users may need to connect cable wiring when:
•
Connecting self-provided cords to the connector housing instead of using the supplied data cable
• Connecting alarm input and output devices.
The following table illustrates the proper way to wire cords into the connector housing.
1. Insert the terminal into the pin holes on the
connector housing, with the hook outward, as
indicated in the figure.
1a. To unlock the terminal, press the hook, as
indicated in the figure, with a proper tool and
pull it out gently.
2. Connect the 22-pin connector to the dome
camera.