OpenEye CM-511 Installation Manua - Manual (Page 11)

29243AC 11
INTRODUCTION
OVERVIEW
With a weather resistant feature, the Integrated High Speed Dome Camera is applicable to outdoor installations.
The dome camera supports all-in-one cabling for easy installation and can be integrated with CCTV products,
such as DVRs, Control Keyboards, and CCTV accessories for a total surveillance solution. In addition, a large
set of built-in protocols provides connectivity to other surveillance systems. The built-in protocols include OPTIX
3, Pelco, VCL, Philips, AD-422, etc.
GENERAL OPERATION REQUIREMENTS
A minimum of one control device is required for operation, such as a control keyboard, or a DVR. The integrated
high speed dome camera contains a built-in receiver that decodes commands from a control device.
Connect dome cameras to other devices, as shown in the diagram below, to complete a video surveillance
system.
SYSTEM CONFIGURATION
Note To extend the network distance up to 1.2 km (4000 feet) and to protect the connected devices,
OpenEye recommends placing a repeater at the mid-point. However, a repeater may be needed with
network distances less than 1.2 km if the cables used are not CAT 5, 24-gauge cables. Refer to the
repeater’s manual for detailed information.