OpenEye Gen5 NVR - Manual (Page 94)

94
RADIUS OVERVIEW
RADIUS software is Network DVR Management Software; a powerful utility that allows 100 or more
recorders to be controlled using one computer. This software allows you to view live video, search
saved video, edit and configure setup on each recorder, and import maps of buildings and other
locations.
The RADIUS software was specifically designed as an enterprise software solution.
Highlights:
•
View Live Video on most computers
•
Username and Password protected
•
Easy to use graphical interface
Basics:
In order to log in to the recorder server, a user account must be made for each user. This ensures that
only authorized personnel are allowed to log in. In addition, each user can be assigned different
privileges that allow them or deny them access to different functions.
Configuring the Server for Remote Connection
1. From the Display screen, click Setup.
2. Click Network.
3. Ensure that Disable Remote Control is cleared.
Note If you are using a Firewall, it may be necessary to adjust the port settings on both the recorder
and the Firewall. Contact the Network Administrator for more information.
4. Click Apply.
Note If no additional user accounts have been created the administrator account will be the only
account that can connect to the recorder remotely.
5. The recorder server is now ready to receive incoming connections from Remote Software, Radius,
or MDVR.
Connecting to a Recorder
Refer to the Setup section of the RADIUS Manual for information on using the RADIUS Software. The
RADIUS Manual can be found on the OpenEye Software CD or at http://www.openeye.net.