OpenEye Gen5 NVR - Manual (Page 59)

30777AC 59
Status Check / Email
General
1. From the Display screen, click Setup.
2. Click Administrative.
3. Click Status Check/Email.
4. Select Enable Email Alarm.
5. Enter a From Name and email Address.
Note This name and address will appear in the
From line of email alert messages.
6. Enter the SMTP information for the email
account that will be used to send emails from
the recorder. Contact your administrator for
this information if necessary.
7. If using a secondary email account select Use
Secondary SMTP and complete the SMTP
information.
8. Click Test to check settings (a test message will be sent to the From Address).
9. When you are finished, click Apply then Close.
Users
1. Set up the General tab first.
2. Select the type of Event to send email on.
3. Enter the User and E-mail Address of a
desired recipient.
4. Click Add.
5. Repeat for additional recipients and types of
events.
Note A separate email notification for each
type of event must be set up for a single
recipient to receive notifications for each
type of event.
6. When you are finished, click Apply then
Close.