OpenEye Gen5 NVR - Manual (Page 44)

44
GENERAL SETUP
Display
IP Camera Key Frame Decoding
This will only show key frames (I-frames) in the live view in order to reduce the CPU load. Enabling this
funciton does not impact recorded or remote streaming video.
Use Full Screen
Stretch the OpenEye interface to use the full monitor screen based on the resolution set in Windows.
Display Size
Select from available monitor display sizes. Use to correctly display video on wide screen monitors.
Function
Beep on Login Fail
Enables the recorder to beep continuously in response to a failed login attempt. Only an authorized
login will stop the beeping.
Sequence Setting
Allows the video out picture to automatically cycle through channels at a set speed. Example: .Cycle
through channels 1-6 at four-second intervals.
Dual Monitor
Enable a second monitor connected to the recorder. See Connecting a Second Monitor for complete
instructions.
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the
recorder software.