OpenEye Gen5 NVR - Manual (Page 6)

6
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the NVR. Read the following information carefully. Moisture condensation occurs
during the following cases:
•
When this product is brought directly from a cool location to a warm location.
•
When this product is moved to a hot and humid location from a cool location.
•
When this product is moved to a cool and humid location from a warm location.
•
When this product is used in a room where the temperature fluctuates.
•
When this product is used near an air-conditioning unit vent
•
When this product is used in a humid location.
Do not use the NVR when moisture condensation may occur.
If the NVR is used in such a situation, it may damage discs and internal parts. Remove any CD discs, connect the
power cord of the NVR to the wall outlet, turn on the NVR, and leave it for two to three hours. After two to three hours,
the NVR will warm up and evaporate any moisture. Keep the NVR connected to the wall and moisture will seldom
occur.
WARNING
TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE.
DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN