OpenEye Gen5 NVR - Manual (Page 70)

70
INDEX SEARCH
Using the Index Search can greatly decrease the amount of time spent searching through saved video.
The Index Search allows you to perform a search based on criteria such as Sensor, Motion and Instant
Record events.
Performing an Index Search
1. Click the Calendar button on the Search screen to
select the date to search.
2. Click Index Search.
3. Select the cameras and sensors to include in the
search.
4. Select the Select Time check box to define a
specific period.
5. Select an event type to search (Sensor, Motion,
Instant Record) or select the All Event option.
6. Click OK. There may be a delay while results are
returned. Results will be displayed in a column on
the right side of the screen – Each line represents
a segment of video. If no results are found, “NO
IMAGE FOUND” will appear in the column.
7. Once the results are displayed, double-click any
one to play the associated video.
8. Once the desired image is found, apply it to the
Main Search by clicking Close at the bottom of the
results column.
Index Search Results Display
Image Display Area Time Event Occurred
Event Recorded on Camera # Event Type:
M – Motion
S – Sensor
IR – Instant Record