OpenEye Gen5 NVR - Manual (Page 45)

30777AC 45
Voice Warning
The recorder allows users to play a sound file when either a Motion event or Sensor event occurs. This
file can be a custom created sound file that is unique to the application. The selected WAV file is played
through speakers attached to the recorder.
1. Click the Open Sound File icon to browse for a WAV file. The selected file will display in the box
on the left.
2. Click the Test icon to verify the audio file.
3. Select Motion Event and/or Sensor Event to trigger the audio file.
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the
recorder software.
The Network Device List is a list of available IP camera devices that have sensors enabled. When a
device is selected, the lower table will populate with a list of the sensors for the device.
•
Click the arrow next to a sensor or relay to display the number of the sensor on the recorder.
You can then associate a sensor or relay from the recorder with a sensor or relay on the
network device.
Open Sound File Test