OpenEye Gen5 NVR - Manual (Page 61)

30777AC 61
SMART Alert
1. Set up the General and Users tabs first.
2. Select Enable SMART Alarm.
3. Define the frequency of SMART status checks
(in hours).
4. Select the type of SMART event to trigger an
action.
5. If selecting for temperature checks, define the
maximum HDD temperature.
Note Recommend 65C/150F if using.
6. Select an Action Method: Beep Alert, Popup
Message Alert, or Email Alert.
7. Add a Comment that will be seen in the email
message if desired.
8. When you are finished, click Apply then Close.
Alarm Event
1. Set up the General and Users tabs first.
2. Select Use Email Alarm.
3. Define the frequency to send email alerts (in
minutes).
4. Select the Event Type: Motion, Sensor, No
Signal (video loss).
5. Select With Detail Info to receive a still image
attachment of the associated camera in the
email message.
6. Max Count defines the number of message
that will contain detailed data within the
frequency time frame.
7. Add a Comment that will be seen in the email
message if desired.
8. When you are finished, click Apply then
Close.