Omnia Audio Omnia.9/XE - Manual (Page 23)

release stops completely - is indicated by the same red ribbon, but slightly brighter. Dry voice
detection is indicated by a green ribbon in the same location.
• If the Wideband AGC2 compressor is enabled and placed after the multiband section, or it is used
in one of its Bass modes, its meter will be displayed separately to the right of the multiband display.
The Wideband AGC3 meter will appear after the multiband section as well if it has been enabled.
• The Multiband Stereo Enhancer meters will be displayed if the current preset employs this
feature. Yellow bars extending from the middle outward toward the left and right of the display
indicate a widening of the stereo image. Red bars extending from the left and right edges toward
the middle indicate a narrowing of the stereo image.
• The Final Limiter meters indicate the amount of limiting activity in the final look-ahead peak
limiters.
• The Output Meters indicated the final processed output levels.
Reading the Processing Meters
23