Nortec DRAABE Pure Water System - Manual (Page 45)

Created: 21.09.2006
Changed: 29.02.2008
Printed: 02.03.2009
page 45 of 59
Consumption of salt
is too high. 1. Malfunction control unit of
the water softener.
2. Power supply of the water
softener broken.
1. Please contact the ser-
vice department.
2. Check the power supply
and the plug in power
supply.
If you get no positive results,
please contact the service
department.
The system can not
finish the regenera-
tion mode. 1. Malfunction control
unit of the water sof-
tener.
2. Malfunction of the
PerPur
Please contact the service
department.
DE3-5
Function Possible reasons Possible solutions
No function.
Control lamp
of the main
switch OFF. Power supply broken. Check the power supply
(fuses, voltage etc.). If you
get no positive results,
please contact the service
department.
Unit doesen’t
increases the
inlet pressure. 1. Inlet broken/interrupted.
2. Malfunction of the
PerPur.
3. PerPur is in the regenera-
tion mode.
4. Malfunction of the internal
booster pump.
5. Malfunction of a internal
pressure switch.
1. Check the pre installed
water treatment.
2. Check the PerPur
3. Wait until the regenera-
tion is finished.
4. Please contact the ser-
vice department.
5. Please contact the ser-
vice department.
Dosing unit
Function Possible reasons Possible solutions
Printing results
of your printing
machine is not
satisfactorily. 1. Not enough Aqua Plus in
the reservoir.
2. Malfunction of the dosing
unit.
1. Nachfüllen.
2. Check the dosing unit
(see page 19).
If you get no positive results,
please contact the service
department.
Please inform
Nortec Systems customer service if you ever find a malfunction in the
system (
262.884.4669).