Nortec DRAABE Pure Water System - Manual (Page 34)

Created: 21.09.2006
Changed: 29.02.2008
Printed: 02.03.2009
page 34 of 59
Pipe Pipe
5.3.7 Dosing unit
- The dosing unit must be mounted on a wall which can bear loads.
-
If at all possible, the dosing unit should be installed in a room to which only a limited
category of persons is granted access.
-
The surrounding temperature must lie between +10°C (50°F) and +25°C (77°F)
throughout the year.
70 mm
(2.76 inches)
Figure 17: Mounting a Dosing unit
Delivered by DRAABE
Delivered by DRAABE
INLET
OUTLET
(from pure water tank (to printing machine
or pressure holding valve) connection to dosing unit by
connection to dosing unit by 16mm pipe (outer diameter)
16mm pipe (outer diameter)