Nortec DRAABE Pure Water System - Manual (Page 28)

Created: 21.09.2006
Changed: 29.02.2008
Printed: 02.03.2009
page 28 of 59
5. Installation
5.1
Safety, General Comments
- Assembly and installation work may only be carried out by properly trained techni-
cians (sanitary fitters, electricians). The person who commissions the installation is re-
sponsible for ascertaining that these technicians are qualified.
-
All local regulations and guidelines an carrying out electric and water installations are
to be observed and adhered to.
-
It is imperative that the information and regulations in this chapter on position-
ing system components, on assembly and on the electric installations be ob-
served and adhered to.
5.2
Positioning, General Comments
As a matter of principle, the positioning of a system is determined during planning and re-
corded in the system documents. In every case the following general comments on posi-
tioning are to be observed and adhered to.
- Take care that the construction (wall, column, ceiling construction, etc.) on which the
devices and system components are to be mounted has adequate carrying capacity
and is suitable for secure mounting.
- The system components should be mounted in such a way that sufficient room is avail-
able both for operations and for maintenance.
- No live wires may be laid or present in the area below the installation rail and consoles.
If you have questions about positioning, please contact DRAABE in Ottawa.
5.3
Assembly, General Comments
- The installation is to be carried out in accordance with the general rules of technology
and the connection regulations of the local supply companies.
-
Before installation begins, use the shipping note to check that the delivery is complete
and intact.
-
Pipe assembly may only be carried out by authorised master craftsmen who have had
experience working with PVC.
-
No rebuilding or other changes may be carried out on the devices on one's own au-
thority.
-
No additional fittings (e.g. valves, etc.) may be installed within the DRAABE system
except as is noted in the installation diagram.
-
These installation instructions are only valid for the indicated systems. The systems
delivered to customers are accompanied by corresponding system diagrams with in-
structions for the given customer installation. The assembly instructions, diagrams and
other instructions are binding for execution the installation.
-
It is imperative that you observe the specifications for materials.