NavCom SF-3050 Rev.B - Manual (Page 96)

SF-3050 User Guide – Rev B
3-94
Connect SF-3050 to PC
1. Open StarUtil-3000 on the PC.
2. Click the Connections button to establish
communications between the PC and the
SF-3050. The Port Configuration dialog box
opens.
Refer to Figure 61 for the steps below:
3. Select Ethernet as the Connection Type.
Do not change the default Ethernet
Settings: 192.168.0.2 is the factory
default IP address of the SF-3050.
The default virtual COM port is 4361.
Figure 61: Ethernet Port Configuration
4. Click the Connect button.
5. Verify that the SF-3050 is connected to the PC.
Messages scrolling in the Communication window