NavCom SF-3050 Rev.B - Manual (Page 23)

SF-3050 User Guide – Rev B
Connect Equipment
COM1 - LAN POWER COM2 - USB ANTENNA
Figure 1: SF-3050 Rear View
Refer to Figure 1 for the steps below:
1. Use one of the two supplied data cables for
communications:
• DB9S cable (P/N 94-310260-3006LF):
Connect the Positronic connector end to
COM2 - USB at the rear of SF-3050. Connect
the DB9S end to the PC.
Or
• USB 2.0 Device cable (P/N 94-310266-
3006LF): Connect the Positronic connector
end to COM2 - USB at the rear of SF-3050.
Plug the USB plug end into the PC.

For this initial configuration, Bluetooth

connectivity is not available. Refer to
Chapter 3/Communication Ports for
details on the ports.
1-21