NavCom SF-3050 Rev.B - Manual (Page 130)

SF-3050 User Guide – Rev B
because of the close correlation in phase
measurement corrections between RTK and
StarFire.
Depending on how long the RTK base station
has been running and is StarFire fixed, the
duration of RTK Extend is limited to:
• 2 to 15 minutes for a NCT base station
• 2 to 10 minutes for a non-NCT base station
The correlation between RTK and StarFire
phase measurement corrections decreases
over time, until the system automatically
transitions out of RTK Extend mode to the
next available dGPS mode.
Pull-In Times
RTG (StarFire) Single: Immediate
RTG (StarFire) Dual: 45 minutes, typical
User programmable output rates
SF-3050 Bundles
Rate
G S M
Position, Velocity, and Time
1, 5*Hz Std Std Std
10Hz Opt Opt Std
25*Hz Opt Opt Std
50, 100Hz Opt Opt Opt
Raw Data
1, 5*Hz Std Std Std
10Hz Opt Opt Std
25*Hz Opt Opt Std
50, 100Hz Opt Opt Opt

*5Hz is the default PVT and Raw Data Rate for
A-128