NavCom SF-3050 Rev.B - Manual (Page 46)

SF-3050 User Guide – Rev B
providing a significant signal to noise ratio advantage
over competing technologies, among other benefits.
There are three software bundles: the SF-3050G,
SF-3050S, SF-3050M. Depending upon the bundle,
this receiver provides, but is not limited to:

NavCom’s StarFire
1
Network: A worldwide
Satellite Based Augmentation System (SBAS) for
decimeter level position accuracy (post-
convergence period). Refer to
Appendix C for
detailed information.

RTK: This unique receiver is designed to integrate
easily into Real-Time Kinematic (RTK), field data
verification, topographical surveys, and a wide
variety of surveying applications. The system
resolves ambiguities at startup or on satellite
reacquisition typically within 2 seconds. The
SF-3050 delivers centimeter level position
accuracy via external RTK
2
correction formats.
The receiver is capable of NCT RTK/UltraRTK™,
RTCM 2.3 and 3.0 (code and phase), RTCM 3.1,
types 1014-1017 (Network RTK
3
), and
CMR/CMR+ DGPS operating methods. The
operating software is also capable of supporting
an external radio modem.

Signal Reception: The SF-3050 GNSS engine
includes a digital ASIC to handle high speed signal
processing. The sensor provides proven
unparalleled performance in spite of adverse signal
tracking conditions by incorporating the use of GPS
(L1, L2, L2C, L5), GLONASS (G1, G2), Galileo (E1,
E5a), and SBAS (WAAS, EGNOS, MSAS, GAGAN)
signals (standard for most software bundles).

66 Signal Channels: Provides the ability to track
Dependent on the bundle:
1
Subscription and Software Option
Required;
2
Separate Software Option Required.
3
Not supported in
software version 1.0.
2-44