NavCom SF-3050 Rev.B - Manual (Page 94)

SF-3050 User Guide – Rev B

Refer to the sections above, Ethernet Cable
(Option) and Ethernet/RS-232/1PPS Y-Cable
(Option), for detailed descriptions of the cables.
Setup
This setup uses the factory default IP address of the
SF-3050:
192.168.0.2,255.255.255.0,0.0.0.0
The PC IP address is set manually in Windows.
1. Connect the Positronic 9-Pin connector of the
Ethernet cable (P/N 94-310265-3006LF) to
COM1 - LAN of the SF-3050. Connect the RJ45
plug end to the computer.
2. In Windows, right click on My Network Places and
select Properties from the pop-up menu. The
Network Connections window opens.
3. Right click on Local Area Connection (or the
equivalent) and click Properties from the pop-up
menu. The Local Area Connection window opens.
4. Click on Internet Protocol (TCP/IP). See Figure 59.
IP Address Network Mask Gateway
Figure 59: Local Area Connection Window
3-92