MovinCool CM12 Service Manual - Manual (Page 51)

Repair Section
51
8.3 Removal of Evaporator Fan Assembly
1) Disconnect the three connectors (two white, two-
pin connectors; one white, three-pin connector),
and then take out the two (2) screws and the two
(2) nuts.
2) Disconnect the motor connector (white, six-pin)
from circuit board CN23, and remove the
evaporator fan assembly.
I002773
Ring
Fan
Frame
Motor
I002767
Screws (2)
Nuts (2)
Connectors
ILL00647-00
Evaporator Fan Assembly