MovinCool CM12 Service Manual - Manual (Page 12)

Operation Section
12
Condenser Type of Condenser Plate Fin
Type of Fan Centrifugal Fan
Air Flow High 700 CFM (1190 m 3 /h)
Low 370 CFM (630 m 3 /h)
Max. External Static Pressure 0.12 IWG (30 Pa)
Motor Output High 0.09 kW
Low 0.06 kW
Refrigerant Refrigerant Control Capillary Tube
Type R-410A
Amount 1.59 lb (0.72 kg)
Signal Connection Fire Alarm Input (Signal Type) • No-voltage contact input
• Contact resistance less than 100 ohm
Warning Signal Output 2 A at 30 V DC/AC max. with resistive load
Dimension W × D × H Without Flange and
Mounting Bracket 32.0 × 19.9 × 15.2 in
(813 × 505 × 386 mm)
With Flange and
Mounting Bracket 34.8 × 22.7 × 15.8 in
(884 × 577 × 401 mm)
Weight Net 123 lb (56 kg)
Shipping 137 lb (62 kg)
Condensate Pump
Capacity Pump Rate 5.0 gal/h (19 L/h)
Max. Head 4 ft (1.2 m)
Operating Condition
Range
*2
Evaporator Air Inlet Max. 95°F (35°C), 50% RH
Min. 65°F (18°C), 50% RH
Condenser Air Inlet Max. 113°F (45°C)
Min. 65°F (18°C)
Maximum Duct Length *3 Cold Duct 20 ft (6.1 m)
Hot Duct 10 ft (3.0 m)
Maximum Sound Level *4 High 52 dB(A)
Low 52 dB(A)
Safety Devices Compressor Overload Protector Included
Fan Motor Overload Protector Included
Freeze Protection Thermistor Included
Full Drain Pan Switch Included
Automatic Restart (Power Interruption) Included
High Pressure Interruption Included
Compressor Time Delay 120 sec
Signal Input/Output Included
Control Devices Temperature Control Included
Two Speed Fan Included
ITEM SPECIFICATIONS