MovinCool CM12 Service Manual - Manual (Page 48)

Repair Section
48
8.2 Disassembly
1) Take out the four (4) screws, and then remove
the service panel.
2) Disconnect the two power supply lines from the
terminal, and disconnect the ground line.
CAUTION
• Ground tightening torque:
- 0.74 ± 0.15 ft•lbf (1.0 ± 0.2 N•m)
a) For unit serial number from 0415XXXXC12
to Present *
*:Please refer to page 2 for the position of the
name plate showing the serial number on the
unit.
b)For unit serial number from 0211XXXXC12
to 0315XXXXC12 *
*:Please refer to page 2 for the position of the
name plate showing the serial number on the
unit.
I002761
Screws (4)
Service Panel
ILL00958-00
Power
Supply Line
Ground
Line
G
T R
ILL00541-00
T R
G
Power
Supply Line
Ground
Line