MovinCool CM12 Service Manual - Manual (Page 27)

Operation Section
27
5.5 Compressor
(1) Compressor motor
• The compressor motor is a single-phase motor
and is contained within the same housing as
the compressor.
Specifications:
- Rated Voltage: 115 V
- Rated Output: 890 W
(2) Compressor overload relay
• An external compressor overload relay is used
to protect the compressor motor. This relay is
mounted within the connector housing that
attaches to the top of the compressor. The
relay interrupts the flow of current when there
is an overload condition such as high current
draw and/or high temperature buildup in the
compressor.
Specifications:
Temperature Overcurrent
Contact
Open
302°F (150°C) 17 A 30 min
(at 212°F (100°C))
Contact
Close
142°F (61°C)
I002753
I001691
Bimetal
Terminal
Points