MicroE Mercury II 5000 - Manual (Page 17)

Sensor Alignment and Calibration
IM-Mercury_II_5000_Series Rev. 1 Page 16 ©2014 MicroE Systems
Mercury II 5000 Series Encoders
Installation Manual and Reference Guide
Step Action
4. Double-click the name of the encoder to open the SmartPrecision II Software.
Results: The SmartPrecision II Software Screen displays.
5.2.3 Sensor Alignment and Calibration
Once the SmartPrecision II Software is open, perform sensor alignment and calibration by using
the Calibrate and Align tab.
Step Action
1. Click on the Calibrate and Align tab.
Results: The Calibrate and Align screen opens.
Calibrate and Align Tab
Calibration Status
Calibration Type
Calibration Mode