Microcom 814M Operators Manual - Manual (Page 24)

20
5. Slide the paper guides to appropriate position (210mm or 216mm) according to paper width (see figure
4-12).
4.6.2 Semi-automatic Paper Loading or Manual Paper Loading
• Semi-automatic Paper Loading
1. Turn on the power. The buzzer will beep for paper end.
2. See the figure below, insert the front end of the paper roll smoothly through the paper feeding path
and until the platen roller starts running and holds the paper.
3. The leading edge of the paper will automatically advance to the normal printing position.
Notes:
− Feed the leading edge of the paper under the horizontal positioning shaft (vertical structure does not
have this shaft).
− Feed the paper through the sliding paper guides.
Figure 4-12 Paper Guide Adjustment
Figure 4-13 Semi-automatic Paper Loading