Microcom 814M Operators Manual - Manual (Page 19)

15
3. Paper Roll-Spacer Block
− Install paper roll-spacer block on paper holder only when using a 210mm wide paper roll. For
216mm wide paper, remove the paper roll-spacer block.
Caution: When you install or remove paper roll-locating block, you should adjust both left and right
paper guide modules!
3.6 Interface
1.-- Parallel interface (Centronics)
2.-- Serial interface (RS-232)
3.-- Power socket
4.-- USB interface
5.-- Ethernet
Note:
Either Parallel or USB can be configured in one printer, but not both.
Figure 3-15 USB Interface Model Figure 3-14 Parallel Interface Model
Figure 3-16 Ethernet Interface Model
5