Measurement Computing PointScan Road Map rev.2.0 User Manual
Pointscan road map, Dedicated, Shared” local area networks (lan)
Table of contents
Document Outline
- PointScan Road Maps
- Table of Contents
- Introduction
- 1- Hook up the PointScan Hardware
- 2 - Power up the PointScan Hardware
- 3 - Set up Ethernet Communications
- 4 - Install the IOToolKit Software
- 5 - Start up the IOToolKit Software
- 6 - Configure each Ethernet Module
- 7 - Configure each RS-485 Connected Module
- 8 - Fill in the "Connected To" Information
- 9 - Download the Configuration ...
- 10 - Install the KEPServerEX Software
- 11 - Start up the KEPServerEX Software
- 12 - Configure KEPServerEX
- 13 - Configure DASYLab as the Client Program