Measurement Computing PointScan Road Map rev.2.0 User Manual
Page 26
If the IOtech PointScan100 driver is not listed in the pulldown menu, there
has been an installation error. If this is the case you must uninstall and
reinstall the KEPServerEX software, taking care to include the IOtech
PointScan100 driver in the installation.
(d) In the “New Channel - Network Interface” window, you can leave the selection at
“Default” if you have only one network interface card (NIC) installed in your computer. If
you have multiple NICs installed, you must select the NIC that communicates with the
PointScan hardware in your system. Then click on Next.
(e) In the “New Channel - Write Optimizations” window, you can accept all of the default
parameters and click on Next.
(f) In the “New Channel - Summary” window, review the information for correctness and then
click on Finish.
(g) Select File>Save As to create a KEPServerEX project file for your current system.
New Channel Device Driver Screen
New Channel Summary Screen
22
878395
PointScan Road Map